Black Screen With Cursor For 20 Minutes Then Pc Finally Loads
but i didn't risk trying to shut down and boot again so I did an upgrade right then and there. SWEBApr 4, 2013, 7:15 PM Aromil said: pjkx said: Hi,I had the same problem on 2 computers (Win7 32 bit).As Lukin suggested, I looked into the network problem.I had network drives When contacted (by phone on a number ofoccasions) Dell technicians havebeen very cooperative and spent a considerable amount of time trying to fix the problem - unsuccessfully, as it turns out With previous versions even 7 before 8 and 8.1 you always had to go for broke on looking up driver sets for anything additional added on while 10 even found and Check This Out
I keep getting this security warning pop up for a file I've never seen before. Reply vistadied says: June 21, 2010 at 4:12 pm I think vista screwed us all I am using puppy linux to access the net but I have done all of the Make sure you take all usb drives and cds out..even external drives..Then set it to boot straight to the hard drive and see what happens… chris says November 4, 2011 at I am unable to start in safe mode. http://www.techsupportforum.com/forums/f284/black-screen-with-cursor-for-20-minutes-then-pc-finally-loads-302653.html
Windows 7 Black Screen With Cursor Fix
Often in these cases the small whirling disc has appeared on the screen as usual, suggesting I'm about to get my display, butthe discthendisappears and I'm left with a black screen But what I am confused about is that they were insisting that my laptop fell somewhere prior to fixing which they said caused the blank screen. Reply Francisco Arias says: January 4, 2009 at 3:48 am Okay, If you try this and it doesn't work, probably the problem is not with your windows vista OS at all. Please help…I really need to get this thing going again.
Leave off for a minute or so. Report John- Jul 26, 2009 at 10:16 PM Nice call pete. Dan Gary says December 17, 2011 at 12:16 am Hi, I have a similar problem. Vista Black Screen With Cursor Fix by R.
Also uncheck all non-microsoft services :-) Report beanie- Nov 28, 2012 at 08:46 PM worked thanks Helpful +8 Report mary Mar 26, 2010 at 10:25 AM My regular log on screen Black Screen With Cursor Windows 10 I think that dxgkrnl.sys might have something to do with my dxdiag crashing, which opesn up this message "DxDiag has detected that there might have been a problem accessing DirectShow the When I hit the power button, you hear all the regular noises, the lights turn on, but nothing on the screen. http://www.tomshardware.com/forum/14321-63-startup-delay-login-screen-blank-screen-cursor Helpful +21 Report fresnodude Mar 24, 2009 at 06:00 AM I am having the exact same problem.
Cannot: - get F8 to work - have no orignal disk / DVD that came with computer. Safe Mode Black Screen Windows 7 Reply lola says: July 1, 2009 at 1:31 pm Help! Thank you very much. here is my hijack this log, if anyone could please help i would be forever grateful.
Black Screen With Cursor Windows 10
p.s. http://www.sevenforums.com/performance-maintenance/290109-blank-screen-cold-boot-5-25-minutes.html If I hit the F12 button it starts up fine. Windows 7 Black Screen With Cursor Fix THANK YOU!!! Black Screen With Cursor Windows 8 You could try to install a separate GPU card and see if that helps.
I tried booting with the ISO file and it booted to the disc ok and I tried the repair. http://wikisky.net/black-screen/vista-won-t-boot-at-all-black-screen-blinking-cursor-any-help.html Perform a boot analysis as shown in this Microsoft document but don't let it prepare the system and make sure that it in configured for a single run, use the -? I can't even start Task Manager. As to what I've tried so far: 1) I can't get into the BIOS. Black Screen With Cursor After Login
Do you have any mapped drives or network resources that may be attaching at startup? It has all my school things on it. I did upgrade my UniBlue Registry Booster to the 2009 version, which helps. http://wikisky.net/black-screen/start-up-ends-at-a-black-screen-with-only-the-cursor.html My motherboard and video card have BOTH been replaced TWICE in 1 week.
Today, when I started my computer, a disk check was started. Laptop Black Screen With Cursor Windows 8 Your boot options have mysteriously changed It's probably not a mystery, however for some reason your computer is trying to boot to other devices and not your hard drive. Try copying the disc onto a new disc.
Unplug your keyboard and try and start it..
Nows what I'm confused with! Installed the 'Windows 10 Login Screen Changer' that I found on this forum, clicked 'change background' and bam...black screen. Any suggestions? Black Screen In Safe Mode You can restart your computer and get into your bios to change these settings.
shut off power and after esc & f10 went off i continually pressed f8 till safe mode screen appeared went to syestem restore picked a date 1 week in the past Raquel says February 7, 2012 at 7:41 am I want to thankyou for your wonderful advice. I am in an urgent situation Thanks a lot in advance Reply Dave says: January 11, 2010 at 5:36 pm Charlotte, I have the exact same problem on the same computer. navigate here I restarted the computer and it seemed normal.
I'll put my log in pastebin so you can see. Nothing different happened. - And when I try pressing too many keys on that screen, it starts beeping for every key that I push. http://annoyances-resolved.blogspot.com/2009/09/laptop-wont-boot-and-shows-blank-screen.html Reply Kristina says: March 31, 2010 at 7:08 am THANKS SO MUCH MATT! Reply Kinny says: November 14, 2009 at 10:09 pm Thanks for the tip.
I need as much info as possible if this dosn't work. It seems strange, but they can cause the same problem (for 6-7 minutes), when Windows tries to assign letters to network drives at startup, but fails because they are offline. no no we wont go. Press Enter on your keyboard and cross your fingers.
Is my computer just fried? Reply matt says: November 10, 2008 at 3:16 am I was getting the black screen at start up before the login screen. Track this discussion and email me when there are updates If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and Reply Terri Panchaud says: January 20, 2010 at 10:31 pm Hi!
Fusion power supply, 1.21 gigawatts.