Home > Hard Drive > New Hard Disk/Motherboard

New Hard Disk/Motherboard


If your system still doesn't recognize your new drive, see the troubleshooting section. Serial ATA is a new interface type. The PC will determine master/slave status according to the drives' placement on the cable ("master" at the end, "slave" in the middle). It is an old drive... In mainstream cases, drive connectors will typically point to the rear. check over here

Reply Tina March 11, 2011 at 5:47 am Wingo, thanks for your feedback. Insert the screws no more than 0.20 inches (5.08 mm) into the bottom-mounting holes and no more than 0.14 inches (3.55 mm) into the side-mounting holes. Do not overtighten the If you already have a SATA drive installed, follow its power cable (the wider of the two connectors) to see if an unused power-supply lead with the same connector is nearby. How to build a PC Previous Next How to build a PC: A step-by-step, comprehensive guide How to avoid common PC building mistakes How to install (or replace) a case fan http://www.pcworld.com/article/131231/how-to-install-a-new-hard-drive-in-your-desktop-pc.html

How To Format A New Hard Drive

You will need a small Phillip’s head screwdriver in order to remove the screws and the panel. Refer to your motherboard documentation for detailed information for your motherboard. Buying a new motherboard and CPU has nothing to do with a bad/old CD drive.If it is CD-ROM only.....that IS the issue. $15 for a new DVD drive might fix the Maximum length is 39 inches (1 meter).A Serial ATA-compatible power cable or adapter (sold separately, unless drive purchased as part of retail kit).A version of Windows with NTFS file system.A system

The computer that used to run so quickly and smoothly now labors to execute simple commands. http://pad2.whstatic.com/images/thumb/8/86/Install-a-Hard-Drive-Step-5-Version-2.jpg/550px-Install-a-Hard-Drive-Step-5-Version-2.jpg http://pad1.whstatic.com/images/thumb/8/86/Install-a-Hard-Drive-Step-5-Version-2.jpg/300px-Install-a-Hard-Drive-Step-5-Version-2.jpg /9/9f/Install a Hard Drive Step 5.360p.mp4 You may need to remove more cables or cards in order to access the hard drives in a tight case. 6 Insert your Connector on Motherboard If your computer is not the latest model and initially came with an IDE hard drive, the motherboard might not provide a SATA connector. How To Install A New Hard Drive Windows 7 If necessary install a SATA PCI card. 3.

EditRelated wikiHows How to Install and Update Drivers in Your PC How to Change a Computer Hard Drive Disk How to Add an Extra Hard Drive How to Have More Than How To Install A Second Hard Drive Formatting could take an hour or more, depending on drive capacity. Mounting your hard drive Physically mounting the hard drive in a PC is probably the most difficult part of the installation process. http://www.tomshardware.com/answers/id-2217071/hard-drive-motherboard-recognize.html First, the data connection.

Select Disk Management from the left side. How To Connect Sata Hard Drive To Motherboard Once the hard drive is secure, reinsert any screws. 7 Close up the laptop. Read more. Placement and orientation of the cages or bays will vary from case to case.

How To Install A Second Hard Drive

Subscribe to Our Newsletter Email: Advertisement Scroll down for the next article © 2017 MakeUseOf. click here now In either case, you can do it yourself instead of taking your computer into a repair shop. How To Format A New Hard Drive Go to Configuring the hard drive in BIOS version 6 or less. Install New Hard Drive Windows 10 Look inside—your first task is to determine where your new drive will go.

pfff! check my blog USAFRetJul 13, 2014, 12:47 AM Trying to boot from ONLY the DVD drive connected, what does it actually say?I've seen multiple instances where a DVD burned on one drive is not Do not use both at once! I have summarized the most important points in this article. 1. How To Connect Hard Drive To Motherboard

If you are adding a blank hard drive, continue with the next step. If the drive is retained by a plastic latching system, lift the latch to slide the drive out. When mounting drives in a system, try to leave as much space between them as possible to maximize airflow over the tops and bottoms. Positioning the drives directly in front of an this content Yes No Not Helpful 3 Helpful 2 What do I do when my hard drive has been damaged?

If you want to add an extra hard drive to your computer in order to boost performance, free up space, and create a better experience, it's time to get started. Sata Hard Drive Power Cable Set the jumper for your primary drive to Master. Click the small button to initialize the drive, and then format it as an NTFS volume (right click on the new drive, then click “Format...”).

See if an unused SATA port lies nearby on the motherboard or an interface card.

Privacy Policy © Copyright 2016 HP Development Company, L.P. Next, plug the power-supply lead (keyed, too) that you scouted out in step 2 into the drive, including any necessary extender or adapter. By connecting yourself to ground, you eliminate the possibility of static shock. How To Install A New Hard Drive On A Laptop Handle the drive only by the edges or frame.

With XP and 2000, though, use Windows' Disk Management utility. Let me be clear - I prefer to have Win 7 on the old computer, NOT Vista. 1 answer Last reply Nov 5, 2013 More about hard drive motherboard drtweakNov 5, While the computer restarts, run the system setup program (sometimes called BIOS or CMOS setup). http://wikisky.net/hard-drive/my-hard-drive-disk-disappeared.html If all of your drive controllers are enabled and the drive is properly connected (and functional), it should be listed in the BIOS.  If the drive isn’t listed, shut down your

Especially if additional components like memory or a CD or DVD drive were also added. solved Old hard drive with windows and games on a new motherboard with a new processor? Check www.seagate.com/support/kb/disc/faq/137_overview.html for tips on resolving this problem. Computer keeps restarting, motherboard doesn't recognize hard drives, display says no signal...

CTE Skills.com 756.685 görüntüleme 28:01 How to install a new Hard Drive in a Desktop PC - Süre: 7:31. Still, there are a few things you should know to make installation as smooth as possible.  Drive cages, bays and mounting options Internal 3.5-inch hard disk drives are typically mounted in How does HP install software and gather data? If the drive is not labeled, refer to drive documentation.

Dilinizi seçin.