Home > Hard Drive > XP MCE 2005 Sp2 Boot On Both Separate HDs

XP MCE 2005 Sp2 Boot On Both Separate HDs

Contents

Reply Tom M. Your new disk should be here with no letter name and no info. I had Mandriva 2008 running on my desktop for a little while, but was having quirky permission issues with my USB flash and file sharing. When this post was originally written, 500GB was the largest drive size available and there were no third-party partition tools. navigate here

Ask ! Multimedia system: VIA EN-15000 - XP I would like to switch to Linux. Basically, I want to create a partition with something like 80GB for Windows 7 x64 with RAID 10 spanning 4 1TB disks. Some programs that will do it do not make it an easy option to find.This wikipedia chart will help you check the programs you might have installed at work. check these guys out

Hard Drive Shows Up In Bios But Not Disk Management

formated drive NTSF and thought that would fix problem.. Please, people, don't say how much Terabyte above 2 TB you would like for any "RAID". Windows 98SE, Windows 2000 Pro, Dream Linux, PCLinuxOS, Freespire 4.

Reply AvidElite says: 2010-January-05 at 5:17 pm Hardware and Software raids have their own pros and cons. Can't I reasonably proceed on the assumption that HDs are not the problem? IDE (or PATA) Emulation has the mobo make the actual SATA port appear to Windows to be just a plain IDE drive that it already understands, and it all works with Hard Drive Detected In Bios But Not During Windows 7 Installation Laptop (dead PSU so it doesn't work unless I can fix it): Ubuntu 7.10 and XP Pro SP2. 1.8 GHz P4, 640 MB RAM, 40 GB HDD.

Great! Install/diagnostic/repair Software From Seagate Originally, I setup one large RAID volume, but as soon as I created the first OS-level partition for the OS installation on the logical drive, I could not find any way Do you want to use it as one huge drive, or break it up into two or more Partitions?This will help us customize the advice. https://www.cnet.com/forums/discussions/windows-xp-media-center-2005-service-pack-2-367429/ Example: 1 RAID array of five 1TB Drives -> 2 RAID level 5 Volume Sets that are 2TB each -> 2 standard NTFS (or any other) partitions that are 2TB.

I'm in MI. Hard Drive Shows Up In Bios But Not Disk Management Windows 10 Dreamy1October 23rd, 2007, 08:05 PMJust one. :smile: I dual boot with Windows XP and Ubuntu Gutsy. :wink: K.MandlaOctober 26th, 2007, 02:05 PMTwo with Arch. ... - A 1Ghz Pentium III Dell Windows XP 64-bit, Windows Vista, Windows 7, Windows 8, or later:  All of these operating systems support GUID Partition Table (GPT), which is a newer drive formatting process required to access Only 3 of these sata inputs were "turned on" in the bios.

Install/diagnostic/repair Software From Seagate

Once this worked for me, I tried with different drives and it worked all times, good luck> duanewMar 17, 2010, 9:50 PM I was having a similar problem as others noted http://www.tomshardware.com/forum/244697-32-sata-drive-detected-bios-windows-disk-management During the POST screens there will be a prompt to hit a certain key to enter the RAID Setup portion of BIOS. Hard Drive Shows Up In Bios But Not Disk Management HDTune doesn't see the drive either... Second Hard Drive Not Showing Up In Disk Management Test system: Athlon xp +2600 - Ubuntu and XP.

When the drive is plugged in it also slows down the time between the Windows loading screen and the welcome screen. Main Desktop: Feisty, Lenny, XP and Vista Desktop 2: XP Desktop 3: Dapper Desktop 4: Dapper Desktop 5: Slackware 10.2 (file server) Main Laptop: Feisty and XP Laptop 1: Feisty Laptop You can create a second Partition or more in it if you want.) For this first Partition, make it the Primary or Active Partition, and NOT bootable because this drive is When all the choices are made, go ahead with the Partition operation.When that is done, come back to this new Partition and RIGHT-click again and choose to Format it. Windows 10 Not Detecting Second Hard Drive

WinXP/Ubuntu Feisty dual boot apple_and _linuxOctober 17th, 2007, 05:20 PM1. In short, does the OS / controller consider the whole 6TB drive when writing data or will work fine with 2tb or lower partitions no matter how big the drive? These partions can not be created with windows 32bit, but work just fine for read/write under 32bit windows becauses its how the drive is presented to windows that counts, not how his comment is here Lenovo 12.1" Laptop with XP Pro + Ubuntu + SuSe 10.3 + PcLinuxOS + Hakin9 live CD 5.

And also, "IMHO" is a very stupid abbreviation and saying, because anyone can thus pretend modesty, where there is none, actually. Hard Drive Shows Up In Bios But Not Windows 8 pls stay polite and ask what PART did you not understand! Go to the place where your various hard drives are displayed - often the first set of screens.

Hopefully someone searching and finds this blog will not be left in the dark like I was.

MajorixSeptember 1st, 2007, 02:25 PMThis thread also shows people like hiding that they use Windows in their profiles. My Kubuntu system is for gaming and the such. I got a 4TB harddisk, newly bought, displays in my newest PC, self-built just last year, BIOS has UEFI and all, displays for that new drive two partitions, one 2048TB big, Hard Drive Detected In Bios But Not Booting Cancel reply Carlton Bale View Full Profile → Top Posts & Pages Shimano Ultegra and Dura-Ace Di2 Electronic Shifting - Everything You Need to Know 1080p Does Matter - Here's When

not sure where to go.. others hae their own. Each device is represented by a large horizontal block. Second test machine: VIA M-10000 - Puppy Brick: VIA EX-15000 RebounD11December 25th, 2007, 11:58 PM1 desktop computer currently running OpenSuSE 10.3 & Fedora 8 efil vasersDecember 26th, 2007, 01:22 AMServer (Custom

Reply Davinci says: 2009-December-08 at 9:27 pm DISKPART.EXE DISKPART DIKSPART I understood everything that was written in this info/blog. Networked Storage Server (SageTV Encodings) WindowsXP 15. But no. If I can make my MCE 2005 disk bootable, that will help things along VERY MUCH!!

My second machine is a Velocity Micro ProMagix with an Intel Core 2 Duo 6850 processor, 2GB of 800MHz RAM, nVidia GeForce 8600GTS video card, soundblaster something sound card, ATI TV You can either change their port modes or, much better yet, you can install into Win XP the driver for AHCI devices so that it CAN use these units. It allows you to go above the limit by adding another addressing "bit" in the form of a drive letter. There are more esoteric uses and tools on there but just seeing if it will install is a quick and dirty way to eliminate nagging doubts about your hardware.

What HDD's and optical drives do you have installed already? I can also try putting the first boot HD back in, which has the complete OS and most of my apps and drivers, but that wouldn't make sense unless I first Paperdoc, Thank you very much for this post. not sure yet Dell Optiplex GX110 going to get openSuse to run as a web/file/network server Dell Optiplex GX110 to hopefully become a thin client (small form factor)..

I would like to dump XP but I need it to print to printable CDs. RIGHT-click on its Unallocated Space and, from the menu, choose to Create a Partition on the drive. Please refer to our CNET Forums policies for details. AnonymousJan 29, 2010, 10:37 AM I have the same problem and none of the suggestions worked for me.

I could not beleive itworked OK. Dual 1.2 Ghz Athlon box running Ubuntu 7.04 (soon to be file server) 7. If you don't like the stock appearance of Google Home, here are two quick and easy ways to make it truly yours. The upper one shows you only the devices Windows already knows how to use.

I could throw in the Cisco 2916XL switch (primary switch) and two 2507 routers (CCNA lab), just for the sake of explaining why my electricity bill is climbing! I tried ubuntu on this comp and it works great, no overheating no cutting out and runs pretty quick too.