Home > Windows 10 > Help. I Think I've Killed My PC

Help. I Think I've Killed My PC

Contents

Old paste made your CPU too hot and it fried. However, once your CPU reaches 100C, it will slow itself down to prevent anything bad from happening. If I can't fix it I'll get a computer tech I've had do a diganostic for me before take a look. Computer Specs CPU: Intel I5 2500k, Motherboard: ASrock Fatal1ty Performance Z77 chipset - http://www.asrock.com/mb/Intel/Fatal...Specifications RAM 8GB Corsair dominator DDR 3 (2 x 4GB sticks) Hard Drive: 1TB Seagate 7200 RPM Graphics

If the computer starts you can add components one at a time (with the computer turned off, of course). 12-03-2007, 05:22 AM #9 archer0261 Registered Member Join Date: my tablet works just fine and all of th solved Oops! So I'm guessing this means I've got a problem with the boot order on my laptop? –Vercingetorix Oct 23 '14 at 3:24 Well, it worked once, then I shut I buy some new thermal paste (which is when I discover what it should actually look like), try to take the heatsink off and pull the processor right out of the https://forums.bistudio.com/topic/38505-help-i-think-ive-killed-my-computer-with-binview/

Windows Update Killed My Computer 2016

Why Did Lupin and Snape never spot Sirius in animal form during Prisoner of Azkaban? Follow the guide Knufire posted, and you will have it done in NO TIME. And a smaller partition that I didn't recognize. How does a self-cleaning kitchen put away the dishes?

Then, once I get everything installed and set up to my liking, I make a new system image. always check the PSU. :P It is a technical difference, but's there none the less. Originally Posted by RCgothic I can't think of a reason your hard drive would be affected. Windows 10 Killed My Laptop vertical alignment in lists Mountaintop sea - Characteristics regarding tides, outflow and microclimate Pause notications in OSX whilst in a meeting How to subtly hint at “Boss Fight mechanics” Sending a

And I will soon ask some really dumb questions since I have no clue about graphiccards, component-reactions to each other and ability to work next to each other and so on. So I did as you suggested, created a Windows 7 boot CD from the iso, and was able to go through the installation process. Powered by vBulletin Version 4.2.2 Copyright © 2017 vBulletin Solutions, Inc. https://answers.microsoft.com/en-us/windows/forum/windows_10-update/windows-10-killed-my-computer-and-itself/125a2dec-fdad-4f30-b864-7aeba7e966c5 To start viewing messages, select the forum that you want to visit from the selection below.

Remove all the RAM and other headers/connectors etc. . Windows 10 Hard Drive Failure Join Date: Jan 2007 Posts: 23,001 OS: Xp Try with: Motherboard CPU + heatsink Power supply I.e. - no video card, RAM, HDD etc. If nothing at this point - motherboard (or possibly CPU) is fucked. In further response to Chaz I very carefully researched all the parts when I built this computer and made sure they were compatiable.

Windows 10 Killed My Hard Drive

To start viewing messages, select the forum that you want to visit from the selection below. So I recently got a new motherboard to replace a faulty one. Windows Update Killed My Computer 2016 Register Help Stay Logged On News Comics Shop Forum Forum Home FAQ Community Member List Forum Actions Mark Forums Read Forum Rules Advanced Search | End Your ad could be Windows 10 Ruined My Laptop Is it possible to short cut the restoration process by loading that system image after upgrading again from 8.1 to 10 or is this a bad idea since I don't know

Do a bios reset too. Here is my situation: I have been running Windows 10 since the first stable build without issue. Next step is trying system restore to roll back, and now I have no restore points. I have an 8 pin connector plugged into the socket near the CPU. Windows 10 Update Killed My Laptop

Likewise with a PC, there is a reason my PC is going 6 years later, and I got both Xboxes and PS3s die in 3 years of use... Then stick the RAM in and try again etc. It could also be that the CPU just hasn't seated itself properly. Reply With Quote 07-10-12,12:19 AM #7 Brando View Profile View Forum Posts Member Join Date Jan 2006 Location Brandonia restart the pc, go into the bios, and load optimized defaults,

I'll also try and make sure the powerplug clips down properly. Windows 10 Update Killed My Computer It's just a really tight fit for each of the 24 pins = a serious amount of force required overall. Sorry for all the questions but I am looking at several days of work to restore everything the way I had it and the thought of going through that jut to

An "error occurred and no changes were made to your computer." So simple next step, just restart the computer [again] to refresh everything and this time it only loads to a

Oh, and my board happens to be an Asrock board like OP's. Reply With Quote 19-05-2014,12:37 PM #19 Sakkura View Profile View Forum Posts Private Message Secondary Hivemind Nexus Join Date Jul 2012 Location Denmark Posts 2,437 Originally Posted by trjp My statement idk why it is doing it More resources Tom's Hardware Around the World Tom's Hardware Around the World Denmark Norway Finland Russia France Turkey Germany UK Italy USA Subscribe to Tom's Windows 10 Update Messed Up My Computer You may want to read about that on the Microsoft Website before you do so, however.

At least I back up religiously so the files are there to recover. Update your question to reflect the latest trial and the result, and mention in the first sentence the the recommendation in the answer did not work (that will show up in All was well until I wanted to play some games and just couldn't get them to work using Ubuntu (I tried a virtual machine and wine, nothing worked), so I decided I'll cut some of the foam from my mobo's packaging (cause if I have fractured it already I can't warranty it) and fit it under the motherboard to reduce flex. 2.

Since the new processor is the same socket as mine (AM3), I take my processor out and try the new one. Anyway, so after formatting the drive, I turned off the laptop, stuck the recovery disk in, and powered it on. How can I go about doing this? No need to piss around with lot of little screws, one of which will inevitably end up rattling round the case or shorting out your motherboard.

It does take me far longer than 2 hours to build (a large chunk of extra time for cable management) and double checking everything. No hardware issues found, but something must have broke Hot Network Questions For what reasons was Hiroshima selected to be the city in Japan on which the first atom bomb was I think I just killed my desktop! However, you may not get all of the features from your hardware without the specific hardware drivers (particularly video).

If I can't do it myself I'll get help but I intend to keep learning. Last edited by Farsearcher; 17-05-2014 at 03:11 AM. It hits POST just fine, so the new motherboard's faulty, RMA and that should be the end of it, right? People that buy OEM systems think Linux was a Charlie Brown character, a registry is something you see at target to buy shower gifts, RAM is a Dodge truck and a

So I uninstalled the card. The problems only occurred after this latest automatic update ran. Something else got fried. Needless to say I not so politely declined the offer and hung up.

These versions may not exactly match the separate retail product and the device manufacturer's drivers for the retail product often will not work properly. If that doesn't work try the new CPU you got again to see if that's any better (though I understand if you're nervous about damaging that too).