Transpher Windows XP To 2nd Harddrive
Boot with a Ghost Boot Floppy, or CD, select "Local," then "Disk," then "To Disk." Choose the old hard drive as the source, the new hard drive as the target, and Leo June 24, 2005 8:58 AM There's no single answer - it's going to depend entirely on the programs themselves. Now you'll know if it's allright or not. That's not true of IDE, where a jumper indicates whether a drive is a primary ("master") or secondary ("slave") drive. Source
The screen is now jacked up, but not cracked. No special enclosure required. If this is the case, there may be a better way to transfer the data.4. Next I tried Norton Ghost (Many, many tries). http://www.wikihow.com/Clone-(Copy)--a-Hard-Drive-in-Windows-XP
Clone Hard Drive Windows Xp
This explanation is given to the best of my knowledge but I don't give ANY garanty or liability about it and the one who uses this method is supposed to be Here's a way to do that. Bruce Epper May 11, 2013 at 3:02 am You will need to install XP on that hard drive in the system that will be running it.
or leave it as is If I can get it bootable again. Can I convert an external USB hard drive into an internal one? External hard drives are handy and portable, but occasionally it might be nice to move all that storage into your Sorry in advance. How To Install A Second Hard Drive Windows 10 I can't remember of a problem arising after that method was applied and I've used it many times.
Your system will reboot and Ghost will load in DOS. Cloning Software For Windows Xp The interface: The two hard drive interface types: SATA and IDE (aka PATA) There are two primary disk interfaces these days: SATA (on the left, above) and IDE (on the right). by adkmom / September 2, 2004 11:05 PM PDT In reply to: Install old hard drive as slave drive? Düşüncelerinizi paylaşmak için oturum açın.
Select No paging file on C:, select the larger drive and recreate the paging file with 574MB or more. Windows Xp Clone Os If you're installing a SATA drive as secondary storage, follow the data cable from your current drive (assuming it's SATA, too) to the other end. And then it started to work again (finally). You might need some changes to start up to insure files are being pulled from "D" vice "C".
Cloning Software For Windows Xp
Don't worry, let it time out and boot to default. Use advanced options for safer copying/cloning. Clone Hard Drive Windows Xp Transfer windows 7 hard drive Completely transfer Windows 7 and installed data to another hard drive Transferring the Slave Hard Drive from Windows 7 to Windows 10 solved Hard Drive Crashed, Norton Ghost Xp It will surely solve your problem...
After "retiring" in 2001, Leo started Ask Leo! http://wikisky.net/windows-xp/windows-xp-pro-help.html when I boot it up it gives me the option to go into the bios but when I press said button I just get a black screen. Step 3: Mount and connect the drive The SATA data connector is keyed so you can't install it upside-down. The life span of a hard drive is limited and you may want to check out the odds you are trying to beat if you reuse the drive. How To Install A Second Hard Drive
Click on Settings, then on the Advanced Tab. Then I took the hard drive and put it in the system I wanted... Stay Away From These 2 Features Mac Upgraded to macOS Sierra? have a peek here Yes, you actually CAN install XP (or Windows 7 for that matter) on a hard drive, then put the HD in another machine.
later you can copy display, network and sound driver should the hardware be different. Clone Windows Xp To External Hard Drive Windows 7 will automatically assign a drive letter to the external drive and you'll be able to open windows for the drive's folders, copy files etc. is licensed under aCreative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.Additional information is available athttps://askleo.com/creative-commons-license/.Terms Ads vs.
Should that drive fail you not only lose Windows but also the image backup on the drive, leaving you will no means of recovery.
just like any other drive.One thing you will have to deal with though is accessing your user folders on the external drive.Since you are trying to access those folders from a Check www.seagate.com/support/kb/disc/faq/137_overview.html for tips on resolving this problem. After nearly tearing my hair out I decided to try another cloning program and came across TrueImage. Clone Software For Windows Xp Free Download Use partition configurations 1B, 2B or 3B.
Follow this guide to learn how. The posting of advertisements, profanity, or personal attacks is prohibited. Then physically switch your big drive to the the active boot disk and wipe the small drive (and use it for your page file). Check This Out If you run into any problems, you could easily go 2 or 3 days.Are you sure you want to do this?
If you do that, make sure you have all your driver disks for your Video, sound and what ever else is in there. So when I got a new drive and updated software, I left my "old" drive as "C" and installed the larger drive on D & E (partitioned).Occasionally, malware gets in (family Your PC will reboot. I also keep on hand an inexpensive unit that converts by old EIDE drives into USB drives.
It's a great help if you get into troubles.Kees Flag Permalink This was helpful (0) Collapse - Many thanks to Kee, remusson and rhbass by grandpaw7 / August 26, 2004 11:16 I don't have the installation discs that originally came with the software. Windows had become VERY confused and was running processes of the windows directory on both hard drives! Format 2 or 3 times if you like and put it back in the old box to give away.
Next, ground yourself by touching a metal portion of the chassis. This means that any extra space left over after copying the disk will be available for the operating system to use without having to create a new partition. 4 Clone the EDIT Edit this Article Home » Categories » Computers and Electronics » Hacks ArticleEditDiscuss Edit ArticleHow to Clone (Copy) a Hard Drive in Windows XP Community Q&A If you’re upgrading to The PC will determine master/slave status according to the drives' placement on the cable ("master" at the end, "slave" in the middle).
solved Windows 7 oem transfer to new hard drive?